Shin-J Industrial Company
Shin-J Industrial Company
HOME   NEWS  

How to Build a Mist Fan


Mist fans are wonderful inventions that mix the nice breeze of a fan with a little water mist. This typically can cool a hot area near the fan by several degrees. You see these set up in amusement parks, fairs and other places where lots of people are gathering in the heat of the day, and are used to give people the opportunity to cool off. You can also purchase a mist fan for your own backyard to keep yourself and guests more comfortable. If you don't want to spend the money, however, it is possible to build a mist fan.
1. Set up the fan where you want it. Make sure that you are able to reach an outlet and that the fan is pointing toward the area where people are going to feel it. It is best to use an outdoor fan for this, since these are built to withstand weather conditions such as rain. This means that they will be better equipped to deal with mist and possible puddles.
2. Screw the garden hose into the outside faucet and bring it over to the fan. Add extension hoses if you can't reach the fan.
3. Attach the mister nozzle to the end of the hose. The best kind to use is one that twists on and off instead of one that has a handle. This way it will stay on by itself without having to tape the handle down.
4. Run the hose up the front of the pole stand that the fan is attached to so that the mister nozzle is just below the fan. Tape the hose in place at the pole.
5. Adjust the mister nozzle so that it points out from the pole at an angle and away from the fan. This way the water will spray up into the wind that the fan creates and not into the fan itself. Tape it in place. You might have to wedge something between the hose and the pole to keep the nozzle pointed outward. You could also attach the hose to the bottom of the front of the fan by using zip ties to hold it to the wire cage of the fan. You will still need to wedge it so that it points out away from the fan.
6. Turn the mister nozzle until it is open a little. Turn the fan on first and then the faucet. This is important. You don't want to risk spraying water into the fan. Once the fan is running, turn the water on about halfway. You don't need a massive amount of water for the mister fan to work well, and you can control the pressure with the nozzle end. Adjust the mist nozzle if needed to get the flow you want.

Read more:   
eHow.com http://www.ehow.com/how_6803547_build-mist-fan.html#ixzz28mlnv0RM

 
nozzle、fogging、cooling、misting、green house, humidifying, outdoor cooling, spray, horticulture, evaporative cooing, garden equipminet, mosquito, sterilizing,fog fan,agriculture, reducing temperature, keeping sodden, cleanable nozzle, evaporative cooing, garden equipminet, ,fog fan
copyright©Shin-J Industrial Company. All Rights Reserved. | xson
SHIN-J INDUSTRIAL COMPANY http://www.shinj.com.tw
Shin-J Industrial Company